|
MILLING
DRILLING
TAPPING
ROTARY TOOLING
THREAD MILLS
INDEXABLE INSERTS
YG MILL
- APKT, ADKT, AOMT, APMT
- ENMX - HIGH FEED (HF4)
- ODMT, ODMW, OFER, OFMT, ONHU, ONMU
- PNMU
- RCMT, RDKT, RDKW, RDMT, RDMW, RPMT, RPMW
- SCGT, SDCN, SDKN, SDMT, SDMW, SEGT, SEKN, SEKR, SEKT, SEMT, SNMX, SPCN, SPKN, SPKR, SPMT, SPUN
- TPKN, TPKR, TPUN
- LNKU, LNHU
- MILLING KITS
- MOUNTING BOLTS
|
|
|
|
|
| Rotary Tooling |
Home >
Rotary Tooling > HYDRAULIC CHUCK
|
 |
|
|
|
|
HYDRAULIC CHUCK (For MOULD) BT
|
|
|
|
|
|
|
|
 HYDRAULIC CHUCK (For MOULD) BT |
| TAPER NO. |
MODEL No. |
d1 |
D1 |
D2 |
L |
L1 |
L2 |
G |
EDP NO. |
| 40 | BT40AD/B-HMC6-120 | 6 | 20 | 44.5 | 120 | 70 | 27 | M5x0.8mm | WH100HMC |
| BT40AD/B-HMC6-150 | 6 | 20 | 44.5 | 150 | 100 | 27 | M5x0.8mm | WH102HMC |
| BT40AD/B-HMC8-120 | 8 | 22 | 44.5 | 120 | 70 | 27 | M6x1.0mm | WH104HMC |
| BT40AD/B-HMC8-150 | 8 | 22 | 44.5 | 150 | 100 | 27 | M6x1.0mm | WH106HMC |
| BT40AD/B-HMC10-120 | 10 | 24 | 44.5 | 120 | 70 | 32 | M8x1.0mm | WH108HMC |
| BT40AD/B-HMC10-150 | 10 | 24 | 44.5 | 150 | 100 | 32 | M8x1.0mm | WH110HMC |
| BT40AD/B-HMC12-120 | 12 | 25 | 44.5 | 120 | 70 | 37 | M10x1.0mm | WH112HMC |
| BT40AD/B-HMC12-150 | 12 | 25 | 44.5 | 150 | 100 | 37 | M10x1.0mm | WH114HMC |
| BT40AD/B-HMC16-120 | 16 | 32 | 44.5 | 120 | 70 | 42 | M12x1.0mm | WH116HMC |
| BT40AD/B-HMC16-150 | 16 | 32 | 44.5 | 150 | 100 | 42 | M12x1.0mm | WH118HMC |
| BT40AD/B-HMC20-120 | 20 | 34 | 43.75 | 120 | - | 42 | M16x1.0mm | WH120HMC |
| BT40AD/B-HMC20-150 | 20 | 34 | 47 | 150 | - | 42 | M16x1.0mm | WH122HMC |
|
|
 |
|
